Fulmer 12/60 Honing Machine Handbook
Comprehensive handbook of instructions for the Fulmer Model 12/60 Honing Machine (Serial No. 1201), manufactured by C. Allen Fulmer Co. in Cincinnati, Ohio. This service manual covers the complete setup and operation of this precision honing equipment, including detailed machine description, general characteristics, and full accessory specifications. Sections on installation, initial adjustment, and assembly guide users through proper commissioning. The workshop manual addresses external connections, tool installation procedures for drivehead, hone bodies, universal components, and honing stones, along with fixture installation and coolant system configuration. Originally issued November 1957. Note: Illustrations on pages 7 and 46 are intentionally omitted from this copy. Table of Contents: - SECTION I - DESCRIPTION - 1.1 General - 1.2 General Characteristics - 1.3 Accessories - SECTION II - INSTALLATION & INITIAL ADJUSTMENT - 2.1 Installation of Machine - (1) Unpacking - (2) Placement of units - (3) Assembly - (4) External Connections - 2.2 Installation of Tools - (1) Unpacking - (2) Drivehead - (3) Hone Bodies and universals - (4) Stones - 2.3 Installation of Fixture - (1) Unpacking - (2) Mounting - (3) External Connection - 2.4 Coolant System - (1) Mechanical - (2) Electrical - 2.5 Initial Adjustment - (1) Hydraulic - (2) Mechanical - (3) Electrical - (4) Operational Check-out - (a) Machine - (b) Fulfeed and tools
