Model 155 Shaper Operating and Maintenance Manual
Operating and maintenance manual for the Norment and Lambert Model 155 Shaper, produced by C.O. Porter Machinery Company of Grand Rapids, Michigan. This workshop manual covers everything needed to get the machine running safely and keep it in peak condition. Installation instructions walk you through initial setup, while detailed lubrication guidelines specify mineral oil with 75 viscosity at 100°F for proper operation. You'll find step-by-step vertical adjustment procedures, floor positioning techniques to ensure stability, and motor direction verification to confirm correct rotation. The manual also addresses ongoing oil level maintenance to prevent wear and extend machine life. References factory drawing SH-BA-16019-B for component specifications. Essential reference for operators and maintenance technicians responsible for this industrial shaping equipment.
Documentation must be downloaded on a computer (PC, Mac, or Linux).
Do not use a smartphone or tablet to download documentation; they generally lack sufficient memory capacity to handle large files, and few users know how to locate the download folder on these devices.
Once downloaded, you can use it right away and even print the pages you need, or use your smartphone in photo mode to translate into the language of your choice: Google Translate
Document Details
- Format
- Pages
- 14
- Size
- 4.7 MB
- Category
- Machine Tools