10H/10HC Precision Machining Centers Operator's Manual
Operator's manual for Cincinnati Milacron Models 10H and 10HC-1500/2500 precision machining centers equipped with Acramatic CNC controls. Publication No. 14-25-27 IM Issue 3. Copyright 1977. This workshop manual covers operation, safety precautions, and system setup procedures essential for running these precision machining centers. 88 pages.
Table of Contents:
- How To Use This Manual
- This manual is arranged to provide useful information with a minimum of searching.
- Page numbering follows the outline of the Table of Contents. The page number is located in the lower outside corner of each page.
- For the convenience of quickly finding illustrations referred to in the text, all illustrations have the same number as the page on which they appear. For example, Figure 1.2 is the illustration on Page 2 of Section 1.
- There is an index in the preface with numbered thumb spots to indicate the location of each Section.
- Familiarity with the Table of Contents for each section will facilitate locating particular information easily.
- We suggest that, before the machine is installed, review the Table of Contents for future quick reference and a broad understanding of the layout of the book. Then read the book through and study the instructions thoroughly.
- General Safety Precautions in Section 2 should be read before machine is started.
Documentation must be downloaded on a computer (PC, Mac, or Linux).
Do not use a smartphone or tablet to download documentation; they generally lack sufficient memory capacity to handle large files, and few users know how to locate the download folder on these devices.
Once downloaded, you can use it right away and even print the pages you need, or use your smartphone in photo mode to translate into the language of your choice: Google Translate
Document Details
- Format
- Pages
- 88
- Size
- 28.8 MB
- Category
- Machine Tools