CONTAX - Contax T2 Disassembly

This comprehensive disassembly manual covers complete step-by-step procedures for taking apart and reassembling the Contax T2 rangefinder camera. The workshop manual is organized into three major sections: exterior disassembly including the battery cap, lens covers, lens assembly, and hinge plates; detailed internal disassembly of FPC modules, flash unit, film winding mechanism, and lock plate assembly; followed by full reassembly with precise adjustment procedures. Throughout the repair guide, numbered technical diagrams pinpoint exact locations of screws, springs, electrical contacts, and mechanical components. Critical safety information covers flash capacitor discharge before any service work, while lubrication specifications reference exact products like IC-40, H-26, and FX-16. Soldering and unsoldering procedures are fully documented with wire connection identification diagrams color-coded by wire (red, black, blue, orange). The service manual details optical component installation and alignment, interchangeable cam shaft options, positioning of light-proof tape, and precise adhesive placement for light-proof seals. Additional reference tables correlate focus adjustment washers with specifications, provide cam shaft dimensional data, and note differences between older and newer frame configurations. An indispensable technical reference for anyone performing maintenance, repair, or restoration work on this sophisticated rangefinder model.