Milwaukee-Matic Series E Part Processing Manual
Part Processing Manual for Milwaukee-Matic Series E machines (model EGP/3-66). Second Edition, January 1967. Published by Kearney & Trecker Corporation, Milwaukee, Wisconsin. Includes service update record table for tracking revision levels and processing documentation. Manual contains instructions and technical information for parts processing operations.
Table of Contents:
- Machine Description
- Introduction
- Modes of Operation
- Machine
- Operator's Console
- Machine Control Unit (MCU)
- Power Distribution Panel (PDP)
- Hydraulic Power Supply (HPS)
- Specifications
- Axes Coordinate System and Setup Positions
- Zero Reference Position
- Collision Interlock Zone
- Axis Travel Limits
- Feed Rates
- Spindle
- Index Table and Table Base
- Automatic Tool Changer and Tool Magazine
- Machine Accuracy
- Machine Language
- Programine
- Block Unit Input
- Process Planning Sheet
- Letter Address System
- Program Entries Summary
- Control Tape Format and Preparation
- Tape Description
- Tape Material
- Tape Codes
- Sample Tape
- Tape Preparation
- Tape Correction
- Splicing the Tape
- General Programming
- Introduction
- Sequence Numbers
- Preparatory Commands
- Positioning Mode Axis Commands and Feed Rates
- Contouring Axis and Feed Rate Commands - General
- Slope Contouring Axis Commands and Feed Rate Numbers
- Arc Contouring Axis Commands and Feed Rate Numbers
- Table Index Commands
- Spindle Speed Commands
Documentation must be downloaded on a computer (PC, Mac, or Linux).
Do not use a smartphone or tablet to download documentation; they generally lack sufficient memory capacity to handle large files, and few users know how to locate the download folder on these devices.
Once downloaded, you can use it right away and even print the pages you need, or use your smartphone in photo mode to translate into the language of your choice: Google Translate
Document Details
- Format
- Pages
- 76
- Size
- 26.7 MB
- Category
- Machine Tools