MM-180 Machining Center Programming Manual
Programming and operating manual (PUB 773A Volume II) for the MM-180 Machining Center equipped with KT-Gemini D-17 Control. Includes safety information and operational guidelines for machine operators, supervisors, and maintenance technicians. Document emphasizes safety as everybody's business with detailed precautions and foresight-based accident prevention procedures.
Table of Contents:
- Employer responsibility for selecting competent and qualified employees
- Manuals provided with each machine tool
- Guards and shields in place at all times
- Operators forbidden from changing workpieces near revolving cutters
- Exhaust system recommended when contaminants released during machining
- First aid facilities awareness and use
- Reporting hazardous conditions to supervisors
- Air hoses not available around machine tools
- Illumination levels complying with National Standards
- Fire prevention and protection practices
- Protective footwear for safety
- Eye protection devices
- Employer insistence on safety study and practice
- Adequate lifting facilities with safe load limits
- Floor openings from machine tools covered with non-slip material
- Platforms around machines with non-slip features, railings and toe boards
- Management responsibility to alert personnel of unsafe practices
Documentation must be downloaded on a computer (PC, Mac, or Linux).
Do not use a smartphone or tablet to download documentation; they generally lack sufficient memory capacity to handle large files, and few users know how to locate the download folder on these devices.
Once downloaded, you can use it right away and even print the pages you need, or use your smartphone in photo mode to translate into the language of your choice: Google Translate
Document Details
- Format
- Pages
- 66
- Size
- 22.1 MB
- Category
- Machine Tools