MM-800 HMC Programming and Operating Manual Supplement
Part programming and operating manual supplement for the MM800 Machining Center with KT-GEMINI-D machine control system. Publication PUB 873. Includes service update dated January 11, 1985 documenting increased spindle horsepower from 20 to 35 HP at 180 RPM, with constant torque operation below 180 RPM. Contains performance graph showing horsepower vs RPM curve. Also includes safety documentation (PUB-578).
Table of Contents:
- Machine Descriptions
- Machine Control Unit
- Control Features
- Standard Control Features
- Other Standard Features
- Modes of Operation
- Special Control Features
- Power Distribution Panel
- Hydraulic Power Supply
- MM800 Machine Description
- MM800 Three Axis Machining Center
- MM800 Four Axis Machining Center
- Linear Axes Definitions
- Axis Reference Positions
- Linear Axis Travel Ranges
- X Axis
- Y Axis
- Z Axis
- B Axis Description
- Indexing B Axis
- Rotary B Axis
- Pallet Description
- MM800 Pallet/Table Reference Chart
- MM800 Collision Zones
- Standard Grid
- MM800 Standard Grid Positions
- MM800 Standard Grid Procedure
- Axis Feedrates
- MM800 Capacity Drawings
- Spindle
- Spindle Description
- Spindle Gear Ranges
- Spindle Speeds
- Spindle Horsepower
- Spindle Configuration - Straight Shank
- Spindle Collet
- Axial Tool Retention
- Spindle Keylock
- Spindle Configuration - Tapered Shank
- Taper Sizes
Documentation must be downloaded on a computer (PC, Mac, or Linux).
Do not use a smartphone or tablet to download documentation; they generally lack sufficient memory capacity to handle large files, and few users know how to locate the download folder on these devices.
Once downloaded, you can use it right away and even print the pages you need, or use your smartphone in photo mode to translate into the language of your choice: Google Translate
Document Details
- Format
- Pages
- 113
- Size
- 14.1 MB
- Category
- Machine Tools