Superslant AB Technical Data and Parts List
Hardinge Superslant AB technical reference covering Chapter XII tooling specifications and parts configuration. Details square shank tool geometry (3/4 inch shank, 4.500 inches overall length), tool holder assembly dimensions, and qualified tool holder specifications for the vertical turret. Provides precise X and Z tool dimension references essential for accurate offset setup and tool positioning. Technical drawings illustrate vertical turret top plate layout, tool clamp orientation relative to turret stations, and tool nose positioning geometry. Qualified tool holder dimensioning includes tight tolerances (±.003 inch) with clear definitions of X Tool Dimension, Z Tool Dimension, and Tool Nose Reference Point measurement methods. Dimensional diagrams specify tool slot centerline locations, tool nose radius compensation values, and distinction between O.N.R. (Over Nose Radius) and T.S.C. (To Sharp Corner) measurement protocols — critical for setting up cutting tool offsets correctly on CNC and manual Superslant machines. Essential reference for tool room personnel, setup technicians, and machine operators responsible for tool preparation and offset data entry.
Table of Contents:
- # Table of Contents
- X AND Z TOOL DIMENSIONS
Documentation must be downloaded on a computer (PC, Mac, or Linux).
Do not use a smartphone or tablet to download documentation; they generally lack sufficient memory capacity to handle large files, and few users know how to locate the download folder on these devices.
Once downloaded, you can use it right away and even print the pages you need, or use your smartphone in photo mode to translate into the language of your choice: Google Translate
Document Details
- Format
- Pages
- 96
- Size
- 41.7 MB
- Category
- Machine Tools