DUGUE C360 Wiring Diagram
by DUGUEDetailed electrical wiring diagram for the DUGUE C360 combined woodworking machine equipped with three motors. This technical service manual provides a comprehensive representation of the machine's electrical wiring and connections, including all three motors (Dégau, Toupie, Scie) and their associated control systems. The schematic displays individual motor stops with their respective technical references (T2b-3-GB 3754/e+H for the Dégau motor, T2b-2-GB 3755/e+H for the Toupie motor), as well as the Scie stop. The diagram illustrates three-phase 380-volt connections with minimum cable section of 4 x 2.5 square millimeters to the 380-volt power supply. Also included are details of the PKMO.20 circuit breaker with current failure release coil (reference U.580v, 50 Hz) and the SOBEMI connection panel (Ref. 16/410) with Start/Stop control elements. Motor connections for both 220-volt and 380-volt configurations are clearly shown. Plan number C26.06, this repair and maintenance reference serves as an essential resource for correct installation, troubleshooting, and electrical maintenance of this combined machine.
Documentation must be downloaded on a computer (PC, Mac, or Linux).
Do not use a smartphone or tablet to download documentation; they generally lack sufficient memory capacity to handle large files, and few users know how to locate the download folder on these devices.
Once downloaded, you can use it right away and even print the pages you need, or use your smartphone in photo mode to translate into the language of your choice: Google Translate
Document Details
- Format
- Size
- 9.5 MB
- Category
- Machine Tools